Bach TR300
Appearance
Ease of Navigation
Sound Quality
Bach TR300
When you purchase through links on our site, we may earn an affiliate commission. Here's how it works.
User Reviews
Sound Quality
Appearance
Value For Money
I Bought A Tr300 To Replace My Getzen Which Was Se
I bought a TR300 to replace my Getzen which was sent away for refurbishment.
The instrument had to fill in for my Getzen over several gigs.
The instrument looks fairly average with a laquered finish which imparts a synthetic/plastic feel to the surface of the instrument.
The intonation of the instrument is very suspect. When tuning a trumpet, it is generally accepted that you will maybe have to pull out the tuning slide as much as 15mm. This instrument is in pitch when the slide is pulled out to 42mm. The instrument in its default slide position is grossly sharp in pitch. The instrument would have benefitted froma longer lead pipe and longer pipe to the 3rd valve inlet.
The valve set is OK and performs adequately, as long as the valves are routinely kept clean and lubed with a good quality oil.
The 3rd valve has an adjustable finger ring and plastic limiter slide. The engineering tolerances on all of the valve slides are quite abysmal. The slides are very loose and in the case of the 3rd valve, would fall out if not retained by the limiter.
The instrument tends to suffer a rapid accumulation of water.
There is no definitive ring when the bell is tapped, and it produces a sound very akin to tapping an old lead pipe (donk donk)!
All in all I wouldn't make this particular model the first choice for a beginner. I believe that there are too many issues with this instrument and the last thing a student wants is to have to fight with the instrument.
Yeah........cheers for that. I really wouldn't know, as I've only been playing for 56 years.
First thing. Every trumpet player is different and every trumpet is different. Certain players will have to tune differently because everyone is different. I have used different trumpets and had to also pull out the slide a lot but when another player tried it, it was horribly out of tune for him. It all depends on Embouchure. Second, The 3rd valve falling out without the pinky ring, is a good thing. That means it is a good quality slide. Third, Rapid accumulation of water?? That's your own spit dude. It doesn't just come out automatically. Fourth, Of course the valve set is going to need good quality oil. Otherwise it won't work. The lead pipe thing though, That might be a problem. But otherwise, It's pretty much all you.
Q&A
There are no questions yet. Be the first to ask a question.