After making adjustments to the body harness, so that when the brush cutter was hooked on, the cutting guard was at the correct hight to the ground and the handlebars were sloping slightly forward to enable my hand to sit comfortably on the throttle I found using both the blade and the strimmer attachment comfortable and efficient to use. Once fitted together, I found the helmet set up very comfortable, however It took me a long while to figure it out. The secret is to place the webbing support into the helmet making sure of course that the adjustment is at the back of the helmet. Now looking at the buckles you will see it looks as if the buckles should fit the other way. So you have to bend them over to slot them in to the side of the helmet. Well pleased.