I bought the continental because it looked fabulous and I believed Falcon were well made and good quality. It cost a lot of money and 5 years later it was covered in rust. It is also very badly designed. After chasing around for the best part of a year I eventually got hold of the company and sent them photographs. That is a major task in itself. They agreed it was in a poor condition and replaced almost the entire front and top. The top had also collapsed into the frame. I really can’t believe that a product that commands so much money looked like that after such a short time. I have no idea where this cooker, or it’s parts are made, but all I can say is steer clear. It is nowhere as good as it looks. Very poor quality. The grill oven doesn’t grill at all and your face gets fried every time you open the oven! I wish I hadn’t wasted my money.

I chose the Falcon Continental 1092 Dual fuel range because of its sturdy and smart looks, it’s 5 generous burners (rather than 7 or 8 unnecessary ones) and 2 large fan ovens that you can see into and that are not right at ground level. It was part of an expensive kitchen makeover, so we splashed out for good quality. Or so we thought. What a disaster. First it arrived missing a small but essential part of the wheel/levelling mechanism. I contacted the retailer who contacted Falcon (Aga Rangemaster actually) to send a replacement. After about a week the wrong part arrived. In the meantime we started testing the range. The range front and sides got really hot, and it was clear the cooling wasn’t working. We contacted the company directly and they sent a third party engineer - 10 days was the quickest they could do. He arrived alone (unable to move a range on his own, but it was already pulled out fortunately) and discovered that the cooling fan wasn’t even connected. So clearly no quality checking process during manufacturing. He connected it, but it wasn’t running on after the oven was switched off, so it wasn’t working properly. Another call, another 10 day wait. Separately we were eventually sent the correct part for the levelling mechanism, but it was clear that this would be able to be fitted to the oven base on site. It’s not like you can just flip these things over! When the second engineer arrived (again alone) with the incorrect parts plus was unable to fit levelling mechanism, he just went away to file a report that is wasn’t repairable. So one month on with no oven, we were faced with at least a 6 month wait for a replacement. In the end we got the retailer to substitute a different make of range - of course we needed plumbers and electricians to disconnect and reposition/reconnect pipe/wire. I would steer well clear of Falcon ranges, and I don’t think much of Aga Rangemaster customer service. Fingers crossed we get on better with the new one.

Wish we had bought another range cooker altogether! I can't even cook a roast without the ovens setting off all my smoke alarms every time. I can't even have people over for dinner for a roast meal because as soon as you open the oven tons of smoke comes out and fills the air/room! They have sent 2 technicians out to us to 'fix' the problem but the problem is still the same every time I try and roast a joint of meat or a chicken! I HATE this damn oven. Not to mention that the oven doors don't swing back far enough so there's serious risk of burning your arms. and without a window to see thru you need to open the oven doors regularly to check on the food. The grill temperature adjustment is terribly bad too. My mistake was I fell for the Falcon marketing and the 'look' but it's a highly impractical awfully designed range cooker!

falcom dual fuel
Falcon Continental 1092
the cooker looked good and i was told its was great to cook on with good output of heat. i was very disaapointed in the 1st few months the storage drawer didnt close properly and the oven glass looked a mess after few uses,it looked cloudy between the inner and outer glass on the doors.
rang falcon to complain they sent and idependent repairs that was instruced by them, the engineer identified the fault on the doors and the drawers, and after 2 weeks they came to sort out the faults, i was told by the engineer that falcon was aware that there was fault on the seals on the doors,( only half of the doors were sealed orininaly) and sent part of the seals to be inseted between doors the engineer cleaned the glas sand inserted the missing seal also he replace dthe drawer. after using the over few timet the same problem! same smoky look, rang falcon told that i shoudl take the glass apart myself and clean it, i would need a spanner and that they wouldpost me one, today im waiting fot the spanner that i know i wont be able to use as the doors need someone who knows what they are doing, the rings on the burners have also got chpped. im very disappointed as the cooker was not cheap , come on falcon get ur act together and sort the faults out.