written by leviathan142 on 05/09/2004
Good Points
It was easy to set up, came with batteries for the remote and the power button worked.
Bad Points
Nothing plays without stopping every 2 seconds.
General Comments
I bought the DVD player from Asda yesterday for £35. I got it home and set it up (Which was delightfully simple after my last player). I then turned on the power and relaxed for a long night of movie heaven. But alas, not one of my DVDs (all originals) worked for longer than 2 seconds, the player couldn't recognise any original CDs, CD-R/RWs or MP3 CDs. So I took the thing back and got a replacement. Only to find I was back in the store an hour later after the same thing happened again. DON'T BUY ONE OF THESE!!!!!!!
Mr Boogie's Response to 168731_leviathan142's Review
Written on: 08/08/2005
i have two of these DVD's and i also bought one for my mother-in-law and another friend ...i was advised to buy one and everyone i know who has one is happy with it....without doubt value for money ...second to none.
<br>
<br>i can only think that anyone who has problems with playing Disc's has not DE-CODED it, to do this you need to simply press a few buttons on our remote and away you go....note if it does not DE-CODE first time enter the code has instructed again ...you will get it if not the first time then second or third ...but it work has i have done it at lease 4 times ....PLEASE NOTE THIS COULD MAKE YOUr WARRANTY VOID..but i don't know anyone who has taken one back..
<br>and this is all you have to do....
<br>
<br>How to convert your Pacific DVD-1002 player into a multi-region compatible machine
<br>To change the current region setting on this player
<br>1. Press the Open/Close button on your remote control
<br> 2. Press the Clear button on your remote control
<br>3. Press the 1 button on your remote control
<br>4. Press the 3 button on your remote control
<br>5. Press the 6 button on your remote control
<br>6. Press the 9 button on your remote control
<br>7. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 0 for multi-region playback
<br>8. Press the Open/Close button on your remote control
<br>To change the current region setting on this player if the above does not work
<br>1. Press the Setup button on your remote control
<br>2. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 7 for multi-region playback
<br>3. Press the Pause/Step button on your remote control
<br>4. Press the Previous button on your remote control
<br>5. Press the Next button on your remote control
<br>6. Press the Setup button on your remote control
362570_Bones52's Response to 168731_leviathan142's Review
Written on: 27/04/2008
leviathan 142's code also works on the MK2 of the dvd player, a little FYI