Report Abuse

“The Motoflow, manufactured by Ecoflow plc, and...”

written by Magnetic on 23/08/2005

Good Points
Fuel conditioner for all types of motor.

Bad Points
Only available through Independent Distributors.

General Comments
The Motoflow, manufactured by Ecoflow plc, and formerly known as an Ecoflow, is a fuel conditioner for use in cars and motor vehicles. It is designed for use with petrol and diesel engines, and has been tested by laboratories around the world, including the British Government's environmental laboratory, where a 12,000 mile test showed improved fuel economy, increased power and reduced emissions.


It uses the patented "Central Reverse Polarity" to magnetically condition fuel, and it is believed that this increases the fuels efficiency and power output, and at the same time helps to reduce harmful emissions.


The Motoflow is very easy to fit and takes only a few minutes. It is fitted to the fuel line to the engine by means of straps. It is then ready to start work as it requires no power source or maintenance. The fuel has to pass through the effects of the "Central Reverse Polarity" magnet, thus being conditioned prior to combustion. The process is known as Ionisation by Magnetic Induction.


Engines that have been fitted with a Motoflow have shown to be more fuel efficient, doing more miles to the gallon, and having a more complete combustion. They can be moved from car to car, so once bought you never have to buy another. In our case, it is now fitted to the fourth car and still working just as well. MOT testing has always found there have been no emissions since fitting.


The Motoflow has a recommended retail price of £50. There are two models: Motoflow 1 for all carburettor engines up to seven litres, and Motoflow 2 which is for all other vehicles up to three litres requiring one unit, and over three litres require two.


The Motoflow, like other Ecoflow products, is only available through distributors.