written by on 04/01/2010
I purchased a Epson SX 400 printer which was perfect until I had to change the cartridges. Using genuine types I found that I had to use up almost half the cartridge in the head cleaning process. As this occured at every new cartridge change I be came suspicious and when finally replacing a new cartrige followed by the required head cleaning process I printed one photo and then pulled out the cartrige and then immediately replaced it only to find that I required to go through the process of head cleaning again. This almost exhausted the remaining ink in the cartridge. I believe that there is an inherent fault in the design of their bubble technique head. Defintely not to be recommended and in future it will not be an Epson printer