Item: Ryobi PCN-4545
Rating: 1

Guest's review of Ryobi PCN-4545

“Keep away”

★☆☆☆☆

written by on 11/09/2011

I purchased the Ryobi PCN 4545 and wish I hadn't. With 15 hrs of use the oil pump to the chain stopped working, I thought it was a blockage at first then I stripped it down to see the parts had failed. After 20 hrs of use the Chain break would not release. the only way to use the saw was to remove the break band, this was now a very dangerious tool to use. I would NOT recommend this to anyone.

The Pros to this Chainsaw are:- The colour is good.

Value For Money

write a review

Guest's Comment

Written on: 27/01/2012

I took 1 st personal loans when I was not very old and it aided my business very much. But, I need the car loan again.

Reply to this comment

Guest's Comment

Written on: 25/06/2012

Your doing better than I am! Still haven't gotten a chance to cut the first peice of wood with it. Dam thing is so hard to start! First it was a problem with the fuel line in the tank. Didn't have a filter on the end of it so it would float up out of the gas. Bought a filter and put on it. Next was a fuel line leaking air on the carb. What a bear to take apart! Shame on Ryobi!!! I have several Ryobi gas powered tools but this is cramp! Can't even get to the spark plug without taking the cover off. Try replcing those fuel lines!Just came in from putting it all back together and now it doesn't want to start. Just don't feel like taking it apart just to check the plug. Pulled out my old 35 year old McCaulic saw, put some fuel in it, pulled it three times and roar!

Reply to this comment