panasonic xv10 multiregion code req

From Toronto, 1 post

Originally posted by Garrys on 2 Feb 2004 6:03 AM
For anyone interested, here are all the Panasonic codes that I have, to convert to Multiregion.

[ A112, A120, RP56, RV31, RC-HT80 | RV-60 | SC-DK2 ]

A112, A120, RP56, RV31, RC-HT80

Converting the player to Multi-Region:

1. Ensure there is no disc in the tray and that the tray is closed.
2. Press Stop.
3. Press Stop.
4. Press Setup.
5. Press 3, 8, 8, 8 and 3.
6. Press desired region number.

Converting the player to Multi-Region if the above does not work:

1. Email or write to Panasonic service department and ask for the DVD service Disc No.2 all the info is supplied.
2. It doesn't tell you what it does but the codes turn your player into multiregion.
3. For disabling Macrovision follow the same steps and replace code 3192 to 3193 after you have done the multiregion upgrade.
4. Note This discs works with the new RA players as well.

No known problems.

[ TOP ]

RV-60

Converting the player to Multi-Region:

1. Ensure the players tray is empty.

2. Press Action on the remote.
2. Press 1, > =10, 6, 4, 3 and 8.
3. A new menu option will appear followed by 4 stars.
4. Use one of the following codes to:

3192 - > Multi-Region Enable
3193 - > Macrovision Disable

NB: If you locked your player by pressing [4] instead of [1] after pressing [ACTION], this will also unlock your player.

No known problems.

[ TOP ]

SC-DK2

Converting the player to Multi-Region:

1. Open the players tray.
2. Press 8, 9, 2 and 6 ("*" will be seen on the screen).
3. Select Region (1 to 6) or "0" for Region free
4. Press Play (the tray will close).
Notes:

If you key in 8, 9, 2, 6, 7 the Firmware version will be shown.
If you key in 8, 9, 2, 6, 7 all settings will be returned to default.

No known problems.


I have the RP56 but there is no setup buttons on the player or remote;to get to the setup screen you have to press action. Can you help?

From Australia, 6 posts

The codes I supplied were only for the models listed, not the XV10.

I just had mine converted to Region Free. I took it to the shop where I purchased it and they had just received a tiny, single button remote control to convert the XV10 and similar models. It was changed in the blink of an eye. He would not say where the unit came from, but they are out there.

I suggest going to the shop that sold it or the local service shop for Panasonic.

From Australia, 2 posts

[QUOTED="Garrys"]I am desperate to unlock my DVD region code. Its currently locked to South East Asia's Region.

If anyone got the unlock code to the Panasonic A330 , please let me know.

Greatly appreciated.

From Serbia, 1 post

Originally posted by Garrys on 6 Jan 2004 3:50 PM
I would like one too. Mine is locked to region 4.

I have codes for other Panasonic models:

A112, A120, RP56, RV31, RC-HT80, RV-60, SC-DK2 if anyone is interested.


I have RV31, but I was unable to use codes listed above, since I didn't find SETUP button on it. I am region 2.

Best regards...

1 post

I have the Panasonic A 120.The problem with the region code directions for it is that there is no set up key to change the regions. Is there another key that will do the job.
I did contact Panasonic about a service disc 2,and they think that my dvd player should be taken in .It works perfectly.No service disc is available to the public.
Dean

6 posts

You can rent devices to convert almost all european panasonic models including the DVD-XV10 from http://www.panasonic-remote-hack.co.uk

Is this the tiny remote you saw ?


http://www.shoyle.f9.co.uk/open_trade/custom_remote.jpg