panasonic xv10 multiregion code req

1 post

can anybody help me convert my dvd panasonic xv10 to a multi region. can it be done via the remote.my kids are busting my chops about this.

From Malta, 1 post

A friend of mine needs it too for the same player .Please Help .

From Australia, 6 posts

I would like one too.

From Australia, 6 posts

I would like one too. Mine is locked to region 4.

I have codes for other Panasonic models:

A112, A120, RP56, RV31, RC-HT80, RV-60, SC-DK2 if anyone is interested.

2 posts

Garrys,



I am looking for the Region 2 code for the Panasonic RV31. Can you share that with me?



thanks,

Gavia Immer

From England, 4 posts

I also wish to convert a dvd panasonic xv10 to a multi region. can it be done at all?

From Australia, 6 posts

Follow these instructions:

Converting the player to Multi-Region:

1. Ensure there is no disc in the tray and that the tray is closed.
2. Press Stop.
3. Press Stop.
4. Press Setup.
5. Press 3, 8, 8, 8 and 3.
6. Press desired region number.

Converting the player to Multi-Region if the above does not work:

1. Email or write to Panasonic service department and ask for the DVD service Disc No.2 all the info is supplied.
2. It doesn't tell you what it does but the codes turn your player into multiregion.
3. For disabling Macrovision follow the same steps and replace code 3192 to 3193 after you have done the multiregion upgrade.
4. Note This discs works with the new RA players as well.

No known problems.

Insert 0 as the code for 'no code'

From Australia, 6 posts

For anyone interested, here are all the Panasonic codes that I have, to convert to Multiregion.

[ A112, A120, RP56, RV31, RC-HT80 | RV-60 | SC-DK2 ]

A112, A120, RP56, RV31, RC-HT80

Converting the player to Multi-Region:

1. Ensure there is no disc in the tray and that the tray is closed.
2. Press Stop.
3. Press Stop.
4. Press Setup.
5. Press 3, 8, 8, 8 and 3.
6. Press desired region number.

Converting the player to Multi-Region if the above does not work:

1. Email or write to Panasonic service department and ask for the DVD service Disc No.2 all the info is supplied.
2. It doesn't tell you what it does but the codes turn your player into multiregion.
3. For disabling Macrovision follow the same steps and replace code 3192 to 3193 after you have done the multiregion upgrade.
4. Note This discs works with the new RA players as well.

No known problems.

[ TOP ]

RV-60

Converting the player to Multi-Region:

1. Ensure the players tray is empty.

2. Press Action on the remote.
2. Press 1, > =10, 6, 4, 3 and 8.
3. A new menu option will appear followed by 4 stars.
4. Use one of the following codes to:

3192 - > Multi-Region Enable
3193 - > Macrovision Disable

NB: If you locked your player by pressing [4] instead of [1] after pressing [ACTION], this will also unlock your player.

No known problems.

[ TOP ]

SC-DK2

Converting the player to Multi-Region:

1. Open the players tray.
2. Press 8, 9, 2 and 6 ("*" will be seen on the screen).
3. Select Region (1 to 6) or "0" for Region free
4. Press Play (the tray will close).
Notes:

If you key in 8, 9, 2, 6, 7 the Firmware version will be shown.
If you key in 8, 9, 2, 6, 7 all settings will be returned to default.

No known problems.

From Australia, 6 posts

It can be done as some shops sell them as multiregion. They will not tell me how to do it.

From Amsterdam, 1 post

I tried the code for the xv 10 and it won't work. I tried the dutch panasonic servicedesk but they gave me a very hard time about it and don't want anything to do with the region-subject. Also when I mentioned a service disk no.2 they knew of nothing. HELP !