written by sprint24 on 30/05/2014
I bought my sea isle pool in oct 1988 still looks good, just a little faded on the deck, replaced the liner about three times, and made the cheaper beaded one work, the first couple of beaded liners I had to trim a little off the top of the bead (takes a while to go around 24') the last liner I bought fit in the track fine I paid around 300.00 for these liners but I don't remember witch pool place I ordered them from. I paid about 6,000 in 1988
Click here for Amazon Home & Garden productswritten by on 30/04/2013
Overall, I am very pleased with this pool. Every year it has provided the best entertainment for my family and friends. I have had my Sea Isle pool up since 1998. I have also owned another above ground pool in the past. All pools need maintenance and repair over time. In my case I replaced the aluminum ladder, sand filter system, liner (x1), pump(x 2)and 3 pump motors in 15 years of swimming in this pool. Yes, it seems pretty expensive to keep it up and running but the chemicals are very harsh and corrosive. This year(2013)I am replacing the liner for the first time. USA industries is no longer in business so finding a new liner has been a challenge. The bead at the top of the liner is just a bit different than any other liner. Committing to buying a new liner is tough because the pool supply places are unable to match the liner bead exactly. They are afraid of committing to whether the new liner bead will hold in the Sea Isle bead groove. It is a shame USA Industries bailed out without at least enough information to its venders to what kind of replacement liner would work.
Click here for Amazon Home & Garden productsWritten on: 23/04/2015
This person says they are the exclusive distributor of USA industries above ground pool parts. They have been in business providing parts and service for over 40 years. If you have a Bermuda King Sea Isle pool and are in need of parts or service call at 1-800-288-8423. They are open Monday - Friday 8am-4pm. This was an ad for USA Industries above ground pool parts only including the Bermuda King, Sea Isle, Regal Duchess, Regal Ambassador, Bell Aire and more. This was posted on Craigslist in April 2015
Written on: 23/04/2015
This person says they are the exclusive distributor of USA industries above ground pool parts. They have been in business providing parts and service for over 40 years. If you have a Bermuda King Sea Isle pool and are in need of parts or service call at 1-800-288-8423. They are open Monday - Friday 8am-4pm. This was an ad for USA Industries above ground pool parts only including the Bermuda King, Sea Isle, Regal Duchess, Regal Ambassador, Bell Aire and more. This was posted on Craigslist in April 2015
written by on 17/08/2010
HAVE HAD POOL SINCE 94 AND THIS YEAR I HAD TO REPLACE THE LINER THE DEALER I BOUGHT IT FROM IS NO LONGER IN BUSINESS AND THE LOCAL POOL COMPANY SAID IT WAS A SPECIAL LINER AND THEY COULD NOT FIX A FRIEND FINNALY GAVE ME A PHONE # FOR A COMPANY WITH THE PARTS (18002888423) AND I GOT MY POOL FIX AGAIN.IT WAS EXPENSIVE BUT ATLEAST I CAN SWIM AGAIN
Click here for Amazon Home & Garden productsWritten on: 07/06/2012
We have a Sea Isle 24' Pool that came from U.S.A. Industries inc. I am also trying to find some parts for just wondering if that place you ordered the liner from would also have other parts for this pool? How much was your new liner you bought?
written by on 04/02/2010
I've had this pool since 1999. For us, it was a great investment. The pool looks a bit worn after 11 seasons, but it is still in great shape. I'm getting ready to replace the liner now at a total cost of $1300. We anticipate many more seasons of use. If you live in the midwest or the mid-south, I highly recommend Penguin Pools out of Broken Arrow, OK. They're the retailer we used and I am very pleased with their service.
Click here for Amazon Home & Garden productswritten by dpoohnyc4148 on 23/09/2009
I love my USA Industries Sea Isle pool. I've had it since 1994, No major structural problems. Liner is holding up well since inital installment, I think 1 patch has been applied. Deck painting has developed some staining, trying to find out what original paint was, so that I can properly cover.
Click here for Amazon Home & Garden productswritten by bryan2262001 on 11/06/2009
bought a USA Industries Sea Isle 24' round by 4'' deep pool from usa industries for 10,000 dollars,in 1999, first winter we lost a section of the privacy deck,second year we had to replace the liner, since then we have replaced the pool wall, 9 deck supports and 3 more liners,now the liner has ripped along the top of the skimmer basket, which cannot just be repaired, i have had another pool maker look at it ,was told it is just a poor design,i wouldnt recommend this pool to anyone,they dont honor their warranties either
Click here for Amazon Home & Garden productswritten by rattlehead on 01/06/2009
I bought my USA Industries Sea Isle 24' x 48" Above Ground Pool on 8/02, the bolts rusted after the first year, the paint started peeling off of the aluminum deck the second year,the liner started leaking somewhere last year, the filter and pump were installed below the large part of the deck making it almost impossible to set up and tear down each year, the hose connections they used are ribbed so they had to be replaced so I could take apart for the winter each year, and no one ever wants to cooperate when you call them with a problem. I was young and my wife fell in love with the model they showed us. We should have researched pools a little more before buying.
Click here for Amazon Home & Garden productswritten by mstamarah on 05/12/2008
I've had my USA Industries pool for 12 years. 3 years into it, we needed a new wall and liner, the next set lasted us almost 9 years. Broke in the spring before we could use it that 9th year. Totally a waste of money for the pool at that cost. And you can't get a new wall or liner without going through the dealer. And mine's now out of business. Been trying to find someone to fix the pool with no luck. No one wants to touch it.
Click here for Amazon Home & Garden productswritten by alb 1345 on 12/09/2008
We have had the liner replaced 3 times in 7 years at a cost of $500 each time --Prorated warranty!!--And because the pool had to be drained an additional cost of about $500 for water each time--In addition the chemicals we had to dump ---And the guys who did the repair installed the strainer incorrectly and we have a constant leak down the side of the pool and the bottom is not longer flat---Absolutely terrible in all aspects. The pool looks OK when you get it and they have responded to repair of course for $$.
Click here for Amazon Home & Garden productswritten by repaal on 11/06/2008
I have had my USA Industries Sea Isle 24' x 48" Above Ground Pool for 4 years and am on the 3rd liner. Because I live in an area that has a lot of snow and it freezes over winter the seems that split are not due to the poor workmanship of the liner (only one plastic weld instead of 2) I am told this is common because of the bad weather even though the liner is supposed to be a winter liner. The company only refers me to the people who make the repairs. After getting my pool for a Special Price of $10,000 I have never been treated so bad, even the Used Car Dealer works better with you.
If I were anybody out there I would noy buy this pool!
written by sharonleo on 29/04/2008
We have had our USA Industries Sea Isle for 4 years or seasons now. We paid $13.000 for it. We need to replace the liner and it will cost 1,900 for the Sea Isle liner or we can purchase the liner from the company we bought it from for over $500.00 because it supposedly has a special beaded one that we can't purchase no where else. First year we had holes in three of the privacy fence and they were going to charge us $60.00 each when it was to be replaced free. The aluminum siding collapsed in a high wind's this spring and all the water went out and we saw that the rail that the aluminum side sits on needs totally replaced because of rust. I am now wondering if it is worth replacing all this and what the total cost is going to be. Plus they do not service up here in IL now so we are going to have to find some one with experience to do the work and service this. The warranty is not worth the paper it is written on. If you are checking this out to purchase, I recommend to run, do not walk, run away from this company. Find a local pool company that has been around and check with the BBB (Better Business Bureau) first.
Click here for Amazon Home & Garden productswritten by on 18/04/2008
Our USA Sea Isle Pool looked good for about 2 years. It started to fade at 3 years and then the wall totally split apart around the sixth season. For paying 13,000 dollars this pool is so poor, the manufacturer will sell the whole pool as a replacement for 2300 dollars.
Click here for Amazon Home & Garden productswritten by mcnh3 on 17/04/2008
Mine is falling apart after 5 years. Pool wall is corroded and has about 60 1/4 inch holes throughou the wall. The wall has actually split in two. this is a 30 year warranted pool that will cost 3,000 dollars to fix after 8 years. I paid 13,500 dollars for this aluminum pool.
Click here for Amazon Home & Garden productswritten by on 17/04/2008
This USA Industries Sea Isle 24' x 48" Above Ground Pool is the worse investment I have ever made at this point. I am trying to find the manufacture at this time. I had the sea isle for six years of the 30 year warranty and replaced the liner four times and now after the six year mark the whole outer wall deteriorated and now they say it will cost me another 3 thousand dollars to replace the parts needed.
Click here for Amazon Home & Garden productswritten by SAMUELJ on 18/07/2007
The USA Industries Sea Isle 24' x 48" Above Ground Pool is a great pool! It took a few days to get it, but my family love it!!
Click here for Amazon Home & Garden productswritten by kitty14 on 26/06/2007
The USA Industries Sea Isle 24' x 48" Above Ground Pool is corroding after 5 years (aluminum should last 20+ years or so I have read); the dealer (Sun-Fun Pools of Indianapolis, IN) says it would last a family a lifetime on their flyer. They also said that it was all-aluminum construction, but the screws rust.
The pool design allows bugs/insects to get between the pool liner and pool wall, especially when you lower the water level for winter preparation. That made the liner look gross. It may have contributed to the corrosion.
After 6 years we have to pay 60% of the cost of the pool because the warranty is pro-rated (30 year). There are other companies who have 100% warranty on wall and liner.
We have emailed USA Industries 3 times; they still have not responded. One time we asked if we could buy wholesale, another time I told them about the flaw in design of the Sea Isle, and another time I got on them about answering their email. We mailed a letter to the manager of Sun-Fun and heard nothing, then mailed another letter certified to the owner, and so far nothing. They have until the end of this week to answer the certified letter. We gave them two weeks to reply to us in writing. The labor was somewhere around $4000 and the pool was around $6000. So that is basically $10,000 for 5 years of swimming pool. I think they charge too much on labor and some other things. Just a skimmer costs $90 when I could get a newer model elsewhere for half the price (it even includes a return and skim vac).
I would recommend researching pools before you buy from any pool company. We did little if any research on pools before we got ours. Although, Sun-Fun doesn't even have a website, nor was it a member of BBB until 3 years later. You should check out the reviews, BBB website, Attorney General's Office, and the web before getting a pool. You could try to e-mail the company/dealer. If they answer you in a reasonable amount of time, chances are they are a good pool company. You want good customer service.
Once we've checked over your question we will put it live on the site and our strong community of experts will hopefully give you some great answers that you find useful.
We will email you when the question is on the site
Once we've checked over your answer we will put it live on the site so others can gain from your experience. We rely on members like you to sustain our vibrant community so thanks again, we couldn't do it without you.
We will email your when your answer is on the site
Once we've checked over your answer we will put it live on the site so others can gain from your experience. We rely on members like you to sustain our vibrant community so thanks again, we couldn't do it without you.
We will email your when your answer is on the site
Once we've checked over your answer we will put it live on the site so others can gain from your experience. We rely on members like you to sustain our vibrant community so thanks again, we couldn't do it without you.
We will email your when your answer is on the site
Once we've checked over your answer we will put it live on the site so others can gain from your experience. We rely on members like you to sustain our vibrant community so thanks again, we couldn't do it without you.
We will email your when your answer is on the site
Babies55's Comment
Written on: 03/06/2013
Hello,
I need to change my liner as well. I am confused as to beaded or not. There is a plastic type of coping around the liner. Please let me know it you find out what can be used.
Thanks.