AEG Lavamat 16810 Reviews
Latest Reviews
★☆☆☆☆
“Had this machine for 2 years, only 2 of us in the...”
Written on: 02/11/2010
Had this machine for 2 years, only 2 of us in the house, now the circuit board has gone , copletely dead, says repair man, expesnive to buy and install as needs to be set up for specific machines needs a computer only available to certain repair specialists eg high labour charge, based on what i have read here, it will be on its way to the tip before one of these other faults can develop (read more)
★☆☆☆☆
“i have finally had my 5 year old model taken away for...”
Written on: 10/11/2009
i have finally had my 5 year old model taken away for recycling vowing never to buy another AEG - was it bad luck that the door handle came off after 3 years and costing me nearly £90? Was it bad luck a bolt dislodged itself and got stuck between the drum and the casing causing 2 sets of paddles to burst off - another £70 . The bolt caused drum damage and the cost of replacing the drum and paddles is £450 . This is a product by a supposedly great engineering firm - perhaps AEG are no... (read more)
★★☆☆☆
“The AEG Lavamat 16810 door handle came off after 5 years”
Written on: 20/06/2009
The AEG Lavamat 16810 door handle came off after 5 years
Now after 6 years all the paddles inside the drum have all come off during a fast spin.
I have to replace the whole drum . It is so expensive that it is cheaper to buy a new machine.
AEG no longer live up to the reputation they once had , what a shame. They still charge though . I am now going for the cheapest option ,
(read more)
★☆☆☆☆
“I would not recommend this AEG Lavamat 16810. I have...”
Written on: 11/04/2009 by jkwilliams (2 reviews written)
I would not recommend this AEG Lavamat 16810. I have "enjoyed" far too many callouts due to a common blockage problem. AEG are usually excellent but this machine is severely lacking. (read more)
★☆☆☆☆
“”
Written on: 11/04/2009 by jkwilliams (2 reviews written)
There is a fault called an E20, had 4 callouts in one year costing £350, as past the warranty (now an old machine) I have also found the bearings inside the AEG Lavamat 16810 need replacing - am told it would be cheaper to buy a new machine! I have always bought from this manufacturer in the past - this model sadly lets AEG down.
(read more)
★★★★★
“Had the AEG Lavamat 16810 4-5 years now - used 2-3...”
Written on: 11/09/2008 by guest1699 (1 review written)
Had the AEG Lavamat 16810 4-5 years now - used 2-3 times most weeks, and have no hesitation in recommending it.
Some new technology coming out from Siemens and LG - so an automatic replacement of like with like is not guaranteed.
But in lieu of those others being as good as the AEG, then replacing with the current version when the time came, would be a no-brainer.
(read more)
★☆☆☆☆
“Constant E20 blockage problems with regular loads on...”
Written on: 03/08/2008 by overload (1 review written)
Constant E20 blockage problems with regular loads on my AEG Lavamat 16810. Should have dealt with a family with 3 children comfortably, but have lost count at the number of call-outs, mostly under warranty thankfully. After having now paid again for unblocking inside the machine, £65 standard ServiceForce callout, the drum bearings on the machine have gone after 3 years usage. I brought this as a top of the range model - what an expensive waste of money! After having brought AEG in the... (read more)
★★★★★
“The main thing about this AEG washer dryer is that it...”
Written on: 30/06/2008
The main thing about this AEG washer dryer is that it is delivering results - for me it represents excellent value for money! (read more)
☆☆☆☆☆
“A disaster of a machine and I've always bought AEG in...”
Written on: 13/06/2007 by Irisblue (1 review written)
A disaster of a machine and I've always bought AEG in the past. Initially the infamous E20 fault was due to a solid glob of sealant -type material in the drain tube. Removed it and it worked fine for a few washes, then the E20 problem started in earnest. There is no blockage nor anything wrong with the physical state of the machine and the drain tube is not obstructed. It is a design fault of some sort, probably the control board, and these machines should have been withdrawn from the... (read more)
★★☆☆☆
“I have had the AEG Lavamat 16810 washer dryer for 2...”
Written on: 24/12/2005 by davedmd (1 review written)
I have had the AEG Lavamat 16810 washer dryer for 2 years, and the spin problem has been appalling. I am on the verge of getting rid of it and buying another. The dryer works well though. (read more)
See next 10 reviews
Showing 1 - 10 of 11 Reviews
★★★★☆
“This seems to be near identical inside to a relative's...”
Written on: 01/11/2005 by cakewalker (1 review written)
This seems to be near identical inside to a relative's Zanussi machine, but the AEG seems better made and the controls are far easier to understand. Had lousy service from the shop (365 Electrical - the item was delivered damaged) but once correctly installed the machine seems to work competently. The pump for the spray inside the drum developed a rattle briefly - this must have been something small trapped inside and seems to have worked it's way out. This is a very small niggle - otherwise... (read more)
overview
Top 5 Washer Dryers
To calculate the top 5's we take the following factors into account:
• All the star ratings the company/product has received,
• The number of reviews
• How recent the reviews are
As rated by real users
-
1. Miele WT2670
26 reviews read latest review -
2. Hotpoint WD645
8 reviews read latest review -
3. LG F1403RD
4 reviews read latest review -
4. Hotpoint WD640
27 reviews read latest review -
5. Zanussi ZWD12270W
4 reviews read latest review
Hot Stuff in
Latest Reviews in Washer Dryers
-
Miele WT2670
"Just don't go there !!!!" Read More
-
Hotpoint (Indesit made) WD420 Polar
"Hotpoint WD 420" Read More
-
Hotpoint BWD129
"Not worth a tap (if you pardon..." Read More
-
Hotpoint WD420 Aquarius
"Very bad indeed!!!!!!!!!!!!" Read More
-
Indesit WD 12 X
"Dangerous!!!" Read More
Latest items in Washer Dryers
See more ▼
Rdshakhani's Comment
Written on: 15/10/2012
i have had this model for 9 years now with no problems, our household grew to 3 times the size and it is still going strong.only thing is i dont know if its efficient in terms of electricity and water consumption.