Written on: 03/03/2007 by scrubbie (1 review written)
Accurate with right pellets and trigger work
Factory Trigger Approved by Lawsuit Lawyers
Picked one up for 50.00 used, has a BSA 4x32 AO Airgun Scope on it.
Couldn't deal with the trigger , but liked it's accuracy off a bench at 10m.
Replace the trigger let-off screw with a slightly longer one. Mine was not even been touching the sear when fully turned in.
Take the trigger apart, paying CLOSE attention to what goes where, it's all held together with E-clips and spring tension. Remove 2 coils only from long trigger tension spring. No more than 2 or you risk too weak a spring. Polish all parts that contact each other with 600 grit emery cloth and clean off metal dust. Reassemble and put a LIGHT coat of TW25-B or similar synthetic oil. (Dirt won't stick to synthetic oil as badly as gun oil). Adjust lengthened let off screw as needed. I find mine is fickle about where you grip forend. It LOVES Moly coated Crosman Premium Magnum 10.5 gr. About 15.00 a thousand on ebay. Shoot it a LOT and it'll grow on ya' !
" Shark 13MM Air Shotgun " Read More
Written by Ovilla
" Old airgun " Read More
" Walther rotex rm8 " Read More
Written by baggus
" PROBLEMS AFTER 8MONTHS USE " Read More
" BSA Ultra MS in .177 with MMC " Read More
Written by Ratslol