Written on: 27/01/2011
I have had to replace the drive belt after about one month as the brushes were not turning. This was very difficult as the base had to be removed. Ater replacing the belt it was even more difficult to reassemble ,line up all the parts and screw all the screws back in, particularly the screw at the height adjuster. On wooden floors the dust etc is blown away instead of being caught by the suction and blows into corners and up the walls. It is very noisy, the on/off switch is awkwardly placed and the cable gets caught under the vacuum. The next time the drive belt needs replaced I will be dumping this in a skip. Vax power2 pet.