When you buy a Group 1 car seat that states it is "multi recline" you expect this to be the case. The Mo-Si IS a "multi recline" seat but this is what you have to do each time you want to move the seat to a different position ie sitting to sleeping. 1)Stop the car. 2)get out. 3)climb into the back 4)unclip the safety clip at the side of the seat 5)slide the seat to sleep position whilst loosening the cars seat belt 6)put your knee into the seat to push the seat as far into the cars seat as possible (its your choice if you remove your newly sleeping baby, or not!!!!) whilst pulling the cars seat belt tight 7) Clip red safety clip back up 8)get into drivers seat again 9) Drive off I also would like to mention that it does not say anywhere on the Argos website or in the Cosatto instruction manual that came with the car seat that this is what you need to do. (I had to call Cosatto technical support)I assumed when I bought it that a "multi recline" seat with a quick adjust lever would be just that. BE WARNED! I am stuck with an awful product and wasted £80.