Written on: 20/09/2013 by Wombleiscious (1 review written)
This is my third Kodak printer and this time will definitely be the last. It is very noisy on start up and takes ages before it`s actually ready to print. I use it primarily for printing from an sd card to A4 size photos, but, it regularly leaves a pair of white lines down the print or marks, likes ripples which mean the print, and therefore the ink, is wasted. Had this problem almost from day one and Kodak have replaced the printhead three times but has made no difference. I haven`t noticed the ink cartridges lasting longer but that might just be because about 50% of the prints get wasted so it doesn`t leave many usable prints per cartridge. It also frequently shreds the paper as it`s printing which is a bit of a nuisance. On the plus side, the menu is easy to navigate, but, that isn`t much consolation if you are unable to actually print anything. Don`t waste your money on one of these, get something else instead. Even an Etch-a-Sketch would give you better results.